Production Processes Group

- research into manufacturing technology

Ian Hutchings Publications

Publications

Please see list on the Department of Engineering Publication Database: http://publications.eng.cam.ac.uk/view/creators/Hutchings=3AIM=3A=3A.html

2011

• E. S. Betton, W.-K. Hsiao, G. D. Martin and I. M. Hutchings, J. Imaging Science and Technology (in press 2011), 'Behavior of ink-jet printed drops on a corona-treated polymeric film substrate'.
• J. R. Castrejon-Pita, N. F. Morrison, O. G. Harlen, G. D. Martin and I. M. Hutchings, Physical Review E 83 (2011) 036306, 'Experiments and Lagrangian simulations on the formation of droplets in drop-on-demand mode'
• J. R. Castrejon-Pita, N. F. Morrison, O. G. Harlen, G. D. Martin and I. M. Hutchings, Physical Review E 83 (2011) 016301, 'Experiments and Lagrangian simulations on the formation of droplets in continuous mode'.
• J. R. Castrejon-Pita,, G. D. Martin and I. M. Hutchings, J. Imaging Science and Technology (in press 2011), 'Experimental study of the influence of nozzle defects on drop-on-demand ink-jets'.
• R. Castrejon-Garcia, J.R. Castrejon-Pita, G.D. Martin, and I. M. Hutchings, Revista Mexicana de Fisica 57, 266 (2011), 'The shadowgraph imaging technique and its modern application to fluid jets and drops'
• J. R. Castrejon-Pita, E. S. Betton, K. J. Kubiak, M. C. T. Wilson, and I. M. Hutchings, Biomicrofluidics 5 (2011) 014112, 'The dynamics of the impact and coalescence of droplets on a solid surface'.
• J. R. Castrejon-Pita, S. D. Hoath, A. A. Castrejon-Pita, N. F. Morrison, W.-K. Hsiao and I. M. Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 93-96, 'Ultra-High Speed Particle Image Velocimetry on Drop-on-Demand Jetting'.
• S. D. Hoath, W.-K. Hsiao, S. Jung, G. D. Martin and I. M. Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 62-65, 'Dependence of drop speed on nozzle diameter, viscosity and drive amplitude in drop-on-demand ink-jet printing'.
• W.-K. Hsiao, S. D. Hoath, G. D Martin and I. M Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 66-69, 'Jetting, In-Nozzle Meniscus Motion and Nozzle-Plate Flooding in an Industrial Drop-on-Demand Print Head.'
• W.-K. Hsiao, S. D. Hoath, G. D. Martin, I. M. Hutchings, N. B. Chilton and S. Jones, Proc Nanotech 2011 Conference, Boston, June 2011, 'Imbibition dynamics of nano-particulate ink-jet drops on micro-porous media'.
• S. Jung, S. D. Hoath, G. D. Martin and I. M. Hutchings, Journal of Non-Newtonian Fluid Mechanics 166 (2011) 297–306 , 'Experimental study of atomization patterns produced by the oblique collision of two viscoelastic liquid jets'.
• S. Jung, S. D. Hoath, G. D. Martin and I. M. Hutchings, Journal of Imaging Science and Technology 55(1)(2011), 010501-010501-6, 'A new method to assess the jetting behaviour of drop-on-demand inkjet fluids'.
• G. D. Martin, J. R. Castrejon-Pita and I. M. Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 620-623, 'Holographic Measurement of Drop-on-Demand Drops in Flight'.

2010

• E. S. Betton, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 301-304, 'The effects of corona treatment on impact and spreading of ink-jet drops on a polymeric film substrate'.
• J. R. Castrejon-Pita,, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 14-17, 'Influence of nozzle defects on drop-on-demand ink-jets'.
• S. D. Hoath, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 353-355, 'Improved models for drop-on-demand ink-jet shortening'.
• S. D. Hoath, W-K Hsiao, J. R. Castrejon-Pita, D. M. Colgate, S. Jung, I. M. Hutchings, L. Yang, N. F. Morrison, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 23-27, 'Jet diameters and velocity profiles in continuous ink-jets'.
• S. D. Hoath, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 10-13, 'Effects of fluid viscosity on drop-on-demand ink-jet break-off'.
• I. M. Hutchings. Proc. Qualicer '10, XIth World Congress on Ceramic Tile Quality, Castellon, Spain, 2010, Invited paper, 'Ink-jet printing for the decoration of ceramic tiles: technology and opportunities'.
• S. Jung, S. D. Hoath, G. D. Martin and I. M. Hutchings, Physics of Fluids 22, 042101 (2010), 'Atomization patterns produced by the oblique collision of two Newtonian liquid jets'
• G. Sabatini, L. Ceschini, C.Martini, J. A. Williams and I. M. Hutchings, Materials and Design 31 (2010) 816–828, 'Improving sliding and abrasive wear behaviour of cast A356 and wrought AA7075 aluminium alloys by plasma electrolytic oxidation'.
• J. Sato and I. M. Hutchings, Appita Journal 63(5) (2010) 399-406, 'Non-destructive testing of laminated paper products by active infra-red thermography'.

2009

• J. R. Castrejon-Pita, G. D. Martin and I. M. Hutchings, Proc 25th Int. Conf. on Digital Printing Technologies, NIP25, Louisville, KY, USA, 2009, p.107 'A large-scale print-head for drop-on-demand and continuous ink jet studies'.
• H. L. Costa and I. M. Hutchings, J. Mater. Proc. Tech. 209 (2009) 1175-1180, 'Effects of die surface patterning on lubrication in strip drawing'.
• H. L. Costa and I. M. Hutchings, J. Mater. Proc. Tech. 209 (2009) 3869-3878, 'Development of a maskless electrochemical texturing method'
• I. M. Hutchings, Journal of Materials Research 24 (2009) 581-589, 'The contributions of David Tabor to the science of indentation hardness'.
• S. D. Hoath, I. M. Hutchings, G. D. Martin, T. R. Tuladhar, M. R. Mackley and D. Vadillo, J. Imaging Science and Technology 53(4)(2009) 041208, 'Links between ink rheology, drop-on-demand jet formation and printability'.
• S. D. Hoath, G. D. Martin and I. M. Hutchings, Proc 25th Int. Conf. on Digital Printing Technologies, NIP25, Louisville, KY, USA, 2009, p.75, 'A model for jet shortening in drop-on-demand ink-jet printing'.
• W-K. Hsiao, G. D. Martin, S. D. Hoath and I. M. Hutchings, J. Imaging Science and Technology 53(5) 050304, (2009), 'Ink jet printing for direct mask deposition in printed circuit board fabrication'.
• I. M. Hutchings, in V. Saile, K. Ehmann and S. Dimov (eds.) Proc. 4M/ICOMM Int. Conf. on Multi-material Micro Manufacture (4M/ICOMM 2009), Karlsruhe, Germany, September 2009, p.47, DOI: 10.1243/17547164C0012009006 'Ink-jet printing in micro-manufacturing: opportunities and limitations'.
• S. Jung, S. D. Hoath, G. D. Martin and I. M. Hutchings, Proc 25th Int. Conf. on Digital Printing Technologies, NIP25, Louisville, KY, USA, 2009, p.719, 'A new method to assess the jetting behaviour of drop-on-demand inkjet fluids'.
• K. Yokoi, D. Vadillo, E. J. Hinch and I. M. Hutchings, Physics of Fluids 21 (2009) 072102, 'Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface'.

2008

• K. K. B. Hon, L. Li and I. M. Hutchings, CIRP Annals - Manufacturing Technology (2008), 57, 601-620, 'Direct writing technology - advances and developments'.
• H. L. Costa and I. M. Hutchings, Proc Conf. on Digital Fabrication, Pittsburgh, PA, USA, 2008, Society for Imaging Science and Technology, ISBN 978-0-89208-280-3, pp. 256-259, 'Ink-jet printing for patterning engineering surfaces'.
• W.-K. Hsiao, G. D. Martin, S. D. Hoath and I. M. Hutchings, Proc Conf. on Digital Fabrication, Pittsburgh, PA, USA, 2008, Society for Imaging Science and Technology, ISBN 978-0-89208-280-3, pp. 667-670, 'Ink drop deposition and spreading in inkjet-based printed circuit board fabrication'.
• S. D. Hoath, G. D. Martin, T. Tuladhar, M. R. Mackley and I. M. Hutchings, Proc 24th Int. Conf. on Digital Printing Technologies, NIP24, Pittsburgh, PA, USA, 2008, Society for Imaging Science and Technology, ISBN 978-0-89208-280-3, pp. 130-133, 'Links between fluid rheology and drop-on-demand jetting and printability'.
• J. R. Castrejon-Pita, G. D. Martin, S. D. Hoath and I. M. Hutchings, Rev. Sci. Instrum. 79 075108(2008), 'A simple large-scale droplet generator for studies of inkjet printing'.
• J. Sato and I. M. Hutchings, Proceedings of 'Progress in Paper Physics 2008', Helsinki, pp.267-270 (2008), 'Non-destructive testing of paper products by infra-red thermography'.
• J. Sato, I.M. Hutchings and J. Woodhouse, Proc Int. Paper Physics Conference, Queensland, Australia, (2007) vol.2, pp.15-22 'Determination of the dynamic elastic properties of paper and paperboard from the low-frequency vibration modes of rectangular plates', ISBN 978-0-9757469-2-8; also pub. in APPITA Journal, ISSN 1038-6807, 61(4) 291-296, 2008)
• G. D. Martin, S.D. Hoath and I. M. Hutchings, Journal of Physics: Conference Series 105 (2008) 012001, 'Inkjet printing - the physics of manipulating liquid jets and drops'

2007

• H. L. Costa and I. M. Hutchings, Tribology International 40 (2007) 1227-1238, 'Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions'
• S.D. Hoath, G.D. Martin, Castrejon-Pita R. and Hutchings I.M., Proc 23nd Int Conf. on Non-impact printing NIP23, Anchorage, USA, 2007, Society for Imaging Science and Technology, pp. 331-335, 'Satellite formation in drop-on-demand printing of polymer solutions', ISBN 0-89208-273-9
• I.M. Hutchings, G.D. Martin and S.D Hoath, J. Imaging Science and Technology 51(5) 438-444 (2007), 'High speed imaging and analysis of jet and drop formation'
• J. Sato, I.M. Hutchings and J. Woodhouse, Japan TAPPI Journal, vol.61, p.71-85, (2007) 'Measurement of the elastic modulus of paperboard from the low-frequency vibration modes of rectangular plates'
• J. Sato, I.M. Hutchings and J. Woodhouse, Proc Int. Paper Physics Conference, Queensland, Australia, Volume 2 pp. 15-22 (2007) 'Determination of the dynamic elastic properties of paper and paperboard from the low-frequency vibration modes of rectangular plates'

2006

• I. M. Hutchings, Y. Xu, E. Sanchez, M. J. Ibanez and M. F. Quereda, J. Euro. Ceram . Soc. 26 (2006), 1035-1042, 'Porcelain tile microstructure: implications for polishability'.
• E. Sanchez, M.J. Ibanez, J. Garcia-Ten, M.F. Quereda, I.M. Hutchings and Y. Xu, J. Euro. Ceram. Soc. 26 (2006) 2533-2540, 'Porcelain tile microstructure: implications for polished tile properties'.
• I.M. Hutchings, M.G. Gee and E. Santner, in H. Czichos, T. Saito and L. Smith (eds). Springer Handbook of Materials Measurement Methods, Springer Verlag (2006) pp. 685-710, Chapter 13, 'Friction and wear'.
• P. Wang, I.M. Hutchings, S.J. Duncan, L. Jenkins and E. Woo, J. Mater. Sci. 41 (2006) 4847-4859, 'Strain whitening of a thermoplastic olefin material'.
• Y. Xu and I.M. Hutchings, Surface and Coatings Technology 201 (2006) 3044-3050, 'Cold Spray deposition of thermoplastic powder'.
• I.M. Hutchings, Y, Xu, E. Sanchez, M.J. Ibanez and M.F. Quereda, Proc. Qualicer (2006) Castellon, Spain, pp. 389-414, 'Optimisation of the polishing process for porcelain ceramic tiles'.
• I.M. Hutchings, G.D. Martin, S.D. Hoath and R.H. Morgan, Proc 22nd Int Conf on Non-impact printing NIP22, Denver, USA, 2006, Society for Imaging Science and Technology, pp. 91-94, 'High speed imaging and analysis of jet and drop formation'.
• G.D. Martin, I.M. Hutchings and S.D. Hoath, Proc 22nd Int Conf on Non-impact printing NIP22, Denver, USA, 2006, Society for Imaging Science and Technology, pp. 95-98, 'Jet formation and late-stage ligament instability in drop-on-demand printing'.
• I.M. Hutchings and B.J. Briscoe, Wear 260 (2006) 1151-1152, Obituary - David Tabor 1913-2005.

2005

• M.G. Gee, A.J. Gant, I.M. Hutchings, Y. Kusano, K. Schiffman, K. Van Acker, S. Poulat, Y. Gachon, J. von Stebut, P. Hatto, G. Plint, Wear 259 (2005), 27-35, Results from an interlaboratory exercise to validate the micro-scale abrasion test'
• H. Chen, C. Xu, J. Qu, I.M. Hutchings, P.H. Shipway, J. Liu, Wear 259 (2005) 801-806, 'Sliding wear behaviour of laser clad coatings based upon a nickel-based self-fluxing alloy co-deposited with conventional and nanostructured tungsten carbidecobalt hardmetals
• I. M. Hutchings, Y. Xu, E. Sanchez, M. J. Ibanez and M. F. Quereda, J. Mater. Sci. 39 (2005) 37-42, 'Development of surface finish during the polishing of porcelain ceramic tiles'
• K. Adachi and I. M. Hutchings, Wear 258 (2005) 319-322, 'Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness'.
• Y. Kusano and I. M. Hutchings, Wear 258 (2005) 314-318, 'Sources of variability in the free-ball micro-scale abrasion test'.
• H. Chen, C. Xu, Q. Zhou, I.M. Hutchings, P.H. Shipway and J. Liu, Wear 258 (2005) 334-339, 'Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WC-Co coatings'.
• T. Deng, A.R. Chaudhry, M Patel, I. M. Hutchings and M.S.A. Bradley,   Wear 258 (2005) 481-488, 'Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor'  
• T. Deng, J. Li, A.R. Chaudhry, M. Patel, I. M. Hutchings and M.S.A. Bradley, Wear 258 (2005) 403-412, 'Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials'
• T. Deng, M. Patel, I. M. Hutchings and M.S.A. Bradley, Wear 258 (2005) 427-434, 'Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors'
• I. M. Hutchings, K. Adachi, Y. Xu, E. Sanchez , M. J. Ibanez and M. F. Quereda, J European Ceramic Society 25 (2005), 3151-3156, Analysis and laboratory simulation of an industrial polishing process for porcelain ceramic tiles'.
• I. M. Hutchings, in G. W. Stachowiak (ed.), Wear: Materials, Mechanisms and Practice, John Wiley and Sons Ltd, (2005), pp. 1-7, 'The challenge of wear'

2004

• Y. Kusano, K. Van Acker and I.M. Hutchings, Surface and Coatings Technology 183 (2004) 312-327, 'Methods of data analysis for the micro-scale abrasion test on coated substrates'
• V. C. Kumar and I. M. Hutchings, Tribology International 37 (2004) 833-840, Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration'.

2003

• G.T. Burstein, K. Sasaki and I.M. Hutchings, Electrochemical and Solid State Letters 6(11) (2003) D13-D15, 'Lattice changes generated by electrochemically induced surface annealing of austenitic stainless steel'.
• Y. Kusano and I. M. Hutchings, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology 217 (2003) 427-433 'Modelling the entrainment and motion of particles in a gap: application to abrasive wear'.
• Y. Kusano, Z.H. Barber, J.E. Evetts and I.M. Hutchings, Surface and Coatings Technology 174-175 (2003) 601-605, Influence of inert gases on ionized magnetron plasma deposition of carbon nitride films.
• Y. Kusano and I.M. Hutchings, Surface and Coatings Technology 169-170 (2003) 739-742, Analysis of nano-indentation measurements on carbon nitride films.
• K. Adachi and I. M. Hutchings, Wear 255 (2003) 23-29, Wear mode mapping for the micro-scale abrasion test.
• I. M. Hutchings, P. Z. Wang and G. C. Parry, Surface and Coatings Technology 165 (2003) 186-193, An optical method for assessing scratch damage in bulk materials and coatings
• I. M. Hutchings, in I. Sherrington, W.B. Rowe and R.J.K. Wood (eds.), Total Tribology, PEP Ltd., Bury St Edmunds, UK (2003), 27-38, Materials in tribology: opportunities and challenges.
• I. M. Hutchings, in I. M. Hutchings (ed.), Friction, Lubrication and Wear of Artificial Joints, PEP Ltd., Bury St Edmunds, UK (2003),1-6, Biotribology - a personal view
• M.G. Gee, A. Gant, I.M. Hutchings, R. Bethke, K. Schiffman, K. Van Acker, S. Poulat, Y. Gachon and J. von Stebut, Wear 255 (2003) 1-13, 'Progress towards standardisation of ball cratering'.

2002

• R. Hanson, D. Allsopp, T. Deng, D. Smith, M.S.A. Bradley, I.M. Hutchings, M.K. Patel, Proc. Instn. Mech. Engrs. Part E - J. Process Mech. Engineering 216 (E3) (2002) 143-149, A model to predict the life of pneumatic conveyor bends.
• A.L. Greer, K.L Rutherford and I.M. Hutchings, International Materials Reviews, 47 (2002) 87-112, Wear resistance of amorphous alloys and related materials.
• A. Crossley, C. Johnston, I.M. Hutchings, S. Myrha, J.A.G. Temple and U. Wiklund, Thin Solid Films, 414 (2002) 224-230, Surface treatment for galling protection of titanium alloys: characterisation by surface-specific electron and Raman spectroscopies.
• I. M. Hutchings, Proc. Inst. Mech. Engrs. Part J, Journal of Engineering Tribology, 216, (2002), 55-62, Abrasion processes in wear and manufacturing.
• P.Z. Wang, I.M. Hutchings, S.J. Duncan and L. Jenkins Proc. SPE Automotive TPO Global Conference, Detroit USA, 2001, 1-11, Effect of crystallinity on scratch behaviour and other properties of TPO
• M. G. Gee, A. Gant and I. M. Hutchings, 'Rotating wheel abrasive wear testing', NPL Measurement Good Practice Guide No. 55, 2002, National Physical Laboratory.
• M. G. Gee and I. M. Hutchings, 'General approaches and procedures for erosive wear testing', NPL Measurement Good Practice Guide No. 56, 2002, National Physical Laboratory.
• M. G. Gee, A. Gant, I. M. Hutchings, R. Bethke, K. Schiffmann, K. Van Acker, S. Poulat, Y. Gachon and J. von Stebut, 'Ball cratering or micro-abrasion wear testing of coatings', NPL Measurement Good Practice Guide No. 57, 2002, National Physical Laboratory.

2001

• R. I. Trezona and I. M. Hutchings, Progress in Organic Coatings 41 (2001) 85-92, Resistance of paint coatings to multiple solid particle impact: effect of coating thickness and substrate material.
• J.D.B. De Mello, R. Binder, A.N. Klein and I.M. Hutchings, Powder Metallurgy 44 (2001) 53-61, Effect of compaction pressure and powder grade on the microstructure, hardness and surface topography. of steam oxidized sintered ironí.
• B. Racine, A. C. Ferrari, N. A. Morrison, I. Hutchings, W. I. Milne, and J. Robertson, J Appl. Phys 90 (2001) 5002-5012, Properties of amorphous carbon silicon alloys deposited by a high plasma density source.
• I.M. Hutchings, in K.H.J. Buschow et al. (eds.), Encyclopaedia of Materials Science and Technology, Elsevier Science, 2001, 9551-9556, Wear and lubrication.
• D.A. Kelly and I.M. Hutchings, Wear 250 (2001) 76-80, A new method for measurement of particle abrasivity.
• J.D.B. De Mello and I.M. Hutchings, Wear 250 (2001) 435-448, Effect of processing parameters on the surface durability of steam-oxidized sintered iron.
• V. Imbeni, C. Martini, E. Lanzoni, G. Poli and I.M. Hutchings, Wear 251 (2001) 997-1002, Tribological behaviour of multi-layered PVD nitride coatings.
• D.N. Allsopp and I.M. Hutchings, Wear 251 (2001) 1308-1314, Micro-scale abrasion and scratch response of PVD coatings at elevated temperatures.
• U. Wiklund and I.M. Hutchings, Wear 251 (2001) 1034-1041, Investigation of surface treatments for galling protection of titanium alloys.
• I. M. Hutchings, J. Japanese Society of Tribologists, 46(1) (2001) 17-23, Tribology in the UK: past, present and future. (in Japanese)
• J.D.B. De Mello and I.M. Hutchings, in F. Franek, W.J. Bartz and A. Pauschitz (eds.), Tribology 2001, Austrian Tribology Society,Vienna, (2001) 105-112, Surface durability of steam-oxidized sintered iron: effect of surface topography.
• G. C. Parry and I. M. Hutchings, in Proc. International Tribology Conference 2000, Nagasaki, Japan, K. Ichimaru (ed.), Japanese Society of Tribologists, (2001), 943-948, Visual perception of scratch damage on sol-gel derived coatings on aluminium 2117-T8 substrates.
• K. Sasaki, G. T. Burstein and I. M. Hutchings, in Proc. International Tribology Conference 2000, Nagasaki, Japan, K. Ichimaru (ed.), Japanese Society of Tribologists, (2001), 967-972, Improving the tribological properties of stainless steel surfaces by novel electrochemical processing.

  2000

• Y. Kusano, Z. H. Barber, J. E. Evetts and I. M. Hutchings, Surface and Coatings Technology 124 (2000) 104-109, Tribological and mechanical properties of carbon nitride films deposited by ionised magnetron sputtering.
• I. M. Hutchings, S. Wilson and A. T. Alpas, in Comprehensive Composite Materials, A. Kelly and C. Zweben, eds., vol. 3, Metal Matrix Composites, T.W. Clyne, ed., Elsevier, Oxford, 2000, chapter 19, pp. 501-519 Wear of aluminum-based composites.
• G. Walter, V. Heuer and I. M . Hutchings, Proc. 5th European Conf. on Industrial Furnaces and Boilers, Porto, 11-14 April 2000, Prediction of erosion damage to fibre linings in industrial furnaces.
• R. I. Trezona, M.J. Pickles and I. M. Hutchings, Tribology International 33 (2000) 559-571, A full factorial investigation of the erosion durability of automotive clearcoats.
• I. M. Hutchings, in ASM Handbook, vol. 8, ASM International, Materials Park, OH, USA, 2000, pp. 338-345, Solid particle erosive wear testing.
• I. M. Hutchings, in D. Dowson, C. M. Taylor and M. Priest (eds.), Proc. 26th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series, 2000, pp. 37-42 , Applications of the micro-scale abrasion test for coatings and bulk materials.
• A. Joiner, J.A. Linden and I.M. Hutchings, J. Dental. Res. 79 (2000) 1202, The scratch hardness of in-vitro formed pellicle.
• P. Z. Wang, I. M. Hutchings, S. J. Duncan, L. Jenkins and E. Woo, Proc. 7th International Conference on TPO in Automotive, October 23-25, 2000, Michigan, USA, Perception and mechanism of scratches in polymer materials for automotive applications.
• P. Z. Wang, I. M. Hutchings, S. J. Duncan, L. Jenkins and E. Woo, Proc. SPE Automotive TPO Global Conference, Dearborn, 2000, 107-122, A New Technique for Assessment of Scratches in Automotive Interior Systems.
• J. A. Williams, I. M. Hutchings, and W. Y. H. Liew, Proc. International Conference on Tribology in Environmental Design, eds. M. Hadfield and C. Ciantar, PEP, Bury St Edmunds, 2000, 175-184, The influence of the environmental process conditions on the machining of aluminium alloys
• J. Richter, I. M. Hutchings, T. W. Clyne, D.N. Allsopp and X. Peng, Materials Characterization 45 (2000) 233-239, Tribological characterization of diamond-like carbon films on non-ledeburitic high-speed steels.
• G.T. Burstein, I.M. Hutchings and K. Sasaki, Nature 407 no. 6806 (2000) 885-887, Electrochemically induced annealing of stainless steel surfaces.
• R. I. Trezona, I. M. Hutchings and A. P. Weakley, Surface Coatings International, 83 (2000) 588-587 ,Effect of weathering on the mechanical durability of automotive clearcoats.
• G. Walter, V. Heuer and I.M. Hutchings, Keramische Zeitschrift 52 (2000) 668-670, Untersuchungsmethode zur Bestimmung der Erosionsbeständigkeit von Faserdammstoffen.

  1999

• V.Heuer, G. Walter and I. M. Hutchings, Wear 225-229 (1999) 493-501, Erosive wear of fibrous ceramic components by solid particle impact.
• V. Heuer, G. Walter and Hutchings, I. M., in Freiberger Forschungshefte A 851, Warmedammstoffe im Bauwesen und in Hochtemperaturanlagen, eds. E. Schlegel, U. Gross and G. Walter, 1999, 77-95, Zum stromungs- und partikelbedingten Verschleiss von Hochtemperatur-Fasermaterialien.
• R. I. Trezona, D. N. Allsopp and I. M. Hutchings, Wear 225-229 (1999) 205-214, Transitions between two-body and three-body abrasive wear: influence of test conditions in the micro-scale abrasive wear test.
• P. Z. Wang, I. M. Hutchings, S. J. Duncan and L. Jenkins, SAE Transactions 108 (1999) 134-150 Quantitative characterization of scratch damage in polypropylene (TPO) for automotive interior applications.
• Y. Kusano, J. E. Evetts and I. M. Hutchings, Thin Solid Films 343-344 (1999) 250-253, Deposition of boron carbon nitride films by dual cathode magnetron sputtering.
• N. P. Barradas, C. Jeynes, Y. Kusano, J. E. Evetts and I. M. Hutchings, in J. L. Duggan and I. L. Morgan (eds.), Applications of Accelerators in Research and Industry, American Institute of Physics, 1999, 504-507, RBS/Simulated annealing and FTIR characterization of BCN films deposited by dual cathode magnetron sputtering.
• C. Christou, Y. Kusano, K-F. Chiu, I. M. Hutchings and Z. H. Barber, Proc. 24th Int. Conf. on Phenomena in Ionized Gases, Warsaw, Poland, July 1999, Characterisation of ionised magnetron sputtering plasmas for thin film deposition.
• R. I Trezona and I. M. Hutchings, Wear 233-235 (1999) 209-221, Three-body abrasive wear testing of soft materials.
• V. Imbeni, I. M. Hutchings and M. C. Breslin, Wear 233-235 (1999) 462-467, Abrasive wear behaviour of an alumina-aluminium co-continuous composite.
• V. Heuer, G. Walter and I. M. Hutchings, Wear 233-235 (1999) 257-262, High temperature erosion of fibrous ceramic components by solid particle impact.
• Y. Kusano, C. Christou, Z. H. Barber, J. E. Evetts and I. M. Hutchings, Thin Solid Films 355-356 (1999) 117-121, Deposition of carbon nitride films by ionised magnetron sputtering.
• N. Dube and I. M. Hutchings, Wear 233-235 (1999) 246-256, Influence of particle fracture in the high-stress and low-stress abrasive wear of steel.
• W.Y.H. Liew, I. M. Hutchings and J.A. Williams, Machining Science and Technology 3 (1999) 273-286, The interaction between tool material, environment and process conditions in the machining of aluminium alloys.
• D. N. Allsopp, I. M. Hutchings and R. I. Trezona, Tribology Letters 7 (1999) 229-231, Comments on Micro-scale abrasive wear testing of PVD coatings on curved substrates.
• P.Z. Wang, I.M. Hutchings, S.J. Duncan and L. Jenkins, Proc. Conf. TPOs in Automotive 99, Detroit, MI, USA, 1999, A quantitative characterization technique for scratched polymer surfaces.
• L. Kahlman and I. M. Hutchings, Tribology Transactions 42 (1999) 842-850, Effect of particulate contamination in grease-lubricated hybrid bearings. Also pub. in Doktorsavhandlingar vid Chalmers Tekniska Hogskola (1997), No.1318, pp. 1-17

  1998

• M. Choudhury and I. M. Hutchings, in D. Mainard, M. Merle, J. P. Delagoutte and J. P. Louis (eds.), Actualitès en Biomatèriaux, Vol. 4, (1998), 53-62 Effects of gamma irradiation and ageing on abrasive wear of UHMWPE.
• M. Choudhury and I. M. Hutchings, in D. Mainard, M. Merle, J. P. Delagoutte and J. P. Louis (eds.), Actualitès en Biomatèriaux, Vol. 4, (1998), 63-74 Stress-induced phase transformations and molecular structural changes in irradiated ultra-high molecular weight polyethylene tibial components
• H. Chen and I. M. Hutchings, Surface and Coatings Technology 107 (1998) 106-114, Abrasive wear resistance of plasma-sprayed tungsten carbide-cobalt coatings.
• T. E. Howes, P. M. Rogers, J. A. Little and I. M. Hutchings, Corrosion 98, NACE, 1998, paper 194, Erosion-corrosion of mild steel in a temperature gradient.
• W.Y.H.Liew, I. M. Hutchings and J. A. Williams, Tribology Letters 5 (1998) 117-122, Friction and lubrication effects in the machining of aluminium alloys.
• M. J. Pickles, R. I. Trezona, I. M. Hutchings , A. C. Ramamurthy and J. W. Freese, SAE Tech. Paper 980977, SAE International, 1998, Novel methods for characterizing the mechanical durability of automotive paint systems, also pub. in SAE Transactions, Journal of Materials and Manufacturing 107 (1998) 821-828
• D. N. Allsopp, R. I. Trezona and I. M. Hutchings, Tribology Letters 5 (1998) 259-264, The effects of ball surface condition in the micro-scale abrasive wear test.
• Y. Kusano, J. E. Evetts, R. E. Somekh and I. M. Hutchings, Surface and Coatings Technology 332 (1998) 56-61, Properties of carbon nitride films deposited by magnetron sputtering.
• J. Richter, I. M. Hutchings, T. W. Clyne, X. Peng and J. Krajzel, Proc. 1998 Proc. Powder Metallurgy World Congress, vol. 4, EPMA, 1998, vol. 4, 185-190, Diamond-like carbon films on sintered carbides - technology and wear resistance evaluation.

  1997

• I.M. Hutchings, in I. M. Hutchings (ed.), New Directions in Tribology, Mechanical Engineering Publications, Bury St Edmunds, 1997, 267-280, 'Abrasive and erosive wear tests for thin coatings: a unified approach'; also pub. in Tribology International 31 (1998) 5-15.
• M. Choudhury and I. M. Hutchings, Wear 203-204 (1997) 335-340, The effects of irradiation and ageing on the abrasive wear resistance of ultra high molecular weight polyethylene.
• K. L. Rutherford, R. I. Trezona, A. C. Ramamurthy and I. M. Hutchings, Wear 203-204 (1997) 325-334, The abrasive and erosive wear of polymeric paint films.
• N. Axén, L. Kahlman and I. M. Hutchings, Tribology International 30 (1997) 467-474, Correlations between tangential force and failure mechanisms in scratch testing of ceramics.
• X. S. Zhang, T. W. Clyne and I. M. Hutchings, Surface Engineering 13 (5) (1997) 393-401, Relationship between microstructure and erosive wear resistance of plasma-sprayed alumina coatings.
• G. de Silveira and I. M. Hutchings, in Proc. 11th Fundamental Research Symposium, Cambridge, September 1997, C. F. Baker (ed.), Pira International, 1997, vol. 2, 1326-1353, Determination of the friction of paper and board.
• M. J. Pickles and I. M. Hutchings, in Roller D. (ed.), Proc. Conf. on Materials for Energy-efficient vehicles, Int. Symp. on Automotive Technology and Automation, ISATA, Florence, 1997, Automotive Automation Ltd., Croydon, 391-398, Scratch testing: a means of characterising the in-service performance of automotive polymers.
• M. J. Pickles, A. C. Ramamurthy and I. M. Hutchings, in Roller D. (ed.), Proc. Conf. on Paint and Powder Coating Applications in the Automotive Industry, Int. Symp. on Automotive Technology and Automation, ISATA, Florence, 1997, Automotive Automation Ltd., Croydon, 897-904, Influence of baking conditions on the impact durability of automotive paint systems.
• R. I. Trezona, A. C. Ramamurthy and I. M. Hutchings, in Roller D. (ed.), Proc. Conf. on Paint and Powder Coating Applications in the Automotive Industry, Int. Symp. on Automotive Technology and Automation, ISATA, Florence, 1997, Automotive Automation Ltd., Croydon, 913-920, A new technique for the determination of the abrasion resistance of automotive clearcoats.
• P. E. Andersen, J. Bøttiger, K. Dyrbye, I. M. Hutchings, K. L. Rutherford and A. Wroblewski, Materials Science and Engineering A-Structural Materials Properties, Microstructure and Processing 226 (1997) 871-873, Mechanical properties of amorphous Ta1-xCrx thin films
• A. L. Greer, Z. C. Zhong, X. Y. Jiang, K. L. Rutherford and I. M. Hutchings, in Chemistry and Physics of Nanostructures and Related Non-Equilibrium Materials, ed. E. Ma, B. Fultz, R. Shull, J. Morral and P. Nash, TMS, Warrendale, PAS, USA, 1997, 3-12, Al-Y-Ni nanophase composites by devitrification - microstructure, hardness and abrasive wear resistance.
• M. Choudhury, K. L. Rutherford and I. M. Hutchings, Orthopaedic Transactions (1997), Micro-scale abrasion testing: a new method for probing the properties of biomedical polymers.
• M. Choudhury and I. M. Hutchings, Orthopaedic Transactions (1997), X-ray diffraction study of crystallite orientation and phase transformations in UHMWPE tibial inserts.
• T. Biggs, S. S. Taylor, K. L. Rutherford and I. M. Hutchings, Precious Metals 1997, Proc. 21st. IPMI Conference, International Precious Metals Institute, Pergamon Press, 1997, 331-346, The wear behaviour of some platinum alloys.
• F. Kara, P. M. Rogers, I. M. Hutchings and J. A. Little, J. Mater. Sci. 32 (1997) 4575-4583, Microstructural characterisation of surface layers formed on a low alloy steel during erosion-oxidation in a fluidised bed.
• K. L. Rutherford and I. M. Hutchings, Journal of Testing and Evaluation 25 (1997) 259-269, Theory and application of a micro-scale abrasive wear test.
• J. Sato, G. de Silveira and I. M. Hutchings, Tribology International 30 (1997) 633-640, Measurement of the friction of paper by the strip-on-drum method.
• H. Q. Lou, N. Axén, R. E. Somekh and I. M. Hutchings, Surface and Coatings Technology, 90 (1997) 123-127, Effect of deposition conditions on the characteristics of reactively sputtered titanium nitride films.

  1996

• K. L. Rutherford and I. M. Hutchings, Surface and Coatings Technology 79 (1996) 231-239, A micro-abrasive wear test, with particular application to coated systems.
• I. M. Hutchings, in M. J. Adams, B. J. Briscoe and S. K. Biswas (eds.), Solid-solid Interactions, Imperial College Press, London, 1996, 211-224, Deformation and fracture of brittle particles.
• N. Axén, G. A. Botton, H. Q. Lou, R. E. Somekh and I. M. Hutchings, Surface and Coatings Technology 81 (1996) 262-268, Incorporation of nitrogen in sputtered carbon films.
• N. Axén, G. A. Botton, R. E. Somekh and I. M. Hutchings, Diamond and Related Materials 5 (1996) 163-168, Effect of deposition conditions on the chemical bonding in sputtered carbon nitride films.
• L. Chandra, M. Allen, R. Butter, N. Rushton, I. M. Hutchings and T. W. Clyne, Diamond and Related Materials 5 (1996) 410-414, The effect of biological fluids on the response of DLC films to a novel erosion durability test.
• P. H. Shipway and I. M. Hutchings, Wear 193 (1996) 105-113, The role of particle properties in the erosion of brittle materials.
• N. Axén, I. M. Hutchings and S. Jacobson, Tribology International 29 (1996) 467-475, A model for the friction of multiphase materials in abrasion.
• K. L. Rutherford, S. J. Bull, E. D. Doyle and I. M. Hutchings, Surface and Coatings Technology 80 (1996) 176-180, Laboratory characterisation of the wear behaviour of PVD-coated tool steels and correlation with cutting tool performance.
• K. L. Rutherford and I. M. Hutchings, Tribology Letters 2 (1996) 1-11, Micro-scale abrasive wear resistance of PVD coatings on curved substrates.
• N. Axén and I. M. Hutchings, Materials Science and Technology 12 (1996) 757-765, Analysis of the abrasive wear and friction behaviour of composites.
• A. N. J. Stevenson and I. M. Hutchings, J. Materials Science Letters 15 (1996) 688-690, Indentation fracture of small brittle particles.
• A. N. J. Stevenson and I. M. Hutchings, Wear 195 (1996) 232-240, Development of the dry sand/rubber wheel abrasion test.
• H. Q. Lou, N. Axén, R. E. Somekh and I. M. Hutchings, Diamond and Related Materials 5 (1996) 1303-1307, Mechanical properties of amorphous carbon nitride films.
• K.L. Rutherford, P.W. Hatto, C. Davies and I.M. Hutchings, Surface and Coatings Technology 86-7 (1996) 472-479, Abrasive wear resistance of TiN/NbN multi-layers: measurement and neural network modelling.
• K. L. Rutherford and I. M. Hutchings, Surface and Coatings Technology 86-7 (1996) 542-548, Development of the erosion durability technique for thin coatings.
• L. C. Whitmore, I. M. Hutchings, K E. Puttick and A. E. Gee, Proc. MRS Spring Meeting (1996), 420, M. Hack, E. A Schiff, S. Wagner, A. Matsuda and R. Schropp (eds.), Amorphous silicon produced in ultra-fine machining of wafers: microstructure and hardness.
• M. Choudhury and I. M. Hutchings, Trans. Fifth World Biomaterials Congress, Toronto, Canada, 1996, vol. 1, 293, Phase transformations and molecular alignment induced by gamma irradiation and deformation in ultra high molecular weight polyethylene.

  1995

• T. Wakabayashi, J. A. Williams and I. M. Hutchings, Proc. Inst. Mech. Engrs: Part J: Journal of Engineering Tribology 209 (1995) 131-136, Kinetics of gas phase lubrication in the machining of aluminium alloys.
• Y. Li, G. T. Burstein and I. M. Hutchings, Wear 181-183 (1995) 70-79, Influence of environmental composition and electrochemical potential on the slurry erosion-corrosion of aluminium.
• A. N. J. Stevenson and I. M. Hutchings, Wear 181-183 (1995) 56-62, Scaling laws for particle velocity in the gas-blast erosion test.
• P. M. Rogers, I. M . Hutchings and J. A. Little, Wear 186-187 (1995) 238-246, Coatings and surface treatments for protection against low velocity erosion-corrosion in fluidized beds.
• P. M. Rogers, T. E. Howes, I. M. Hutchings and J. A. Little, Wear 186-187 (1995) 306-315, Wastage of low alloy steels in a fluidized bed environment.
• T. E. Howes, P. M. Rogers, J. A. Little and I. M. Hutchings, Wear 186-187 (1995) 316-324, Erosion-corrosion of mild steel in a temperature gradient.
• Y. Li, I. M. Hutchings and G. T. Burstein, Wear 186-187 (1995) 515-524, Influence of corrosion on slurry erosion of aluminium.
• A. N. J. Stevenson and I. M. Hutchings, Wear 186-187 (1995) 150-158, Wear of hardfacing white cast irons by solid particle erosion.
• A. N. J. Stevenson and I. M. Hutchings, Wear 189 (1995) 66-69, The influence of nozzle length on the divergence of the erodent particle stream in a gas-blast erosion rig.
• I. M. Hutchings, in H. M. Hawthorne and T. Troczynski (eds.), Proc. CIM Int. Symposium on Advanced Ceramics for Structural and Tribological Applications, The Metallurgical Society of CIM, Montreal, 1995, 127-138, Development of wear maps for the abrasion and erosion of ceramic materials.

  1994

• I. M. Hutchings, Materials Science and Engineering A184 (1994)185-195, Wear resistant materials: into the next century.
• I. M. Hutchings, Materials Science and Technology 10 (1994) 513-517, Tribological properties of metal matrix composites.
• P. H. Shipway and I. M. Hutchings, Wear 174 (1994) 169-175, A method for optimizing the particle flux in erosion testing with a gas-blast apparatus.
• P. H. Shipway and I. M. Hutchings, Surface and Coatings Technology 71 (1994) 1-8, Measurement of coating durability by solid particle erosion.

  1993

• I. M. Hutchings, Powder Technology 76 (1993) 3-13, Mechanisms of wear in powder technology.
• A. J. Sparks and I. M. Hutchings, Wear 162-164 (1993) 139-147, Effects of erodent recycling in solid particle erosion testing.
• P. H. Shipway and I. M. Hutchings, Wear 162-164 (1993) 148-158, Influence of nozzle roughness on conditions in a gas-blast erosion rig.
• P. H. Shipway and I. M. Hutchings, Phil. Mag. A 67 (1993) 1389-1404, Fracture of brittle spheres under compression and impact loading: I - Elastic stress distributions.
• P. H. Shipway and I. M. Hutchings, Phil. Mag. A 67 (1993) 1405-1421, Fracture of brittle spheres under compression and impact loading: II - Results for lead-glass and sapphire spheres.
• J. C. Arnold and I. M. Hutchings, Wear 161 (1993) 213-221, Erosive wear of rubber by solid particles at normal incidence.
• P. Mouritz and I. M. Hutchings, Tribology International 26 (1993) 41-47, Abrasive wear of steels against silica-filled epoxy resins under combined rolling and sliding motion.
• P. H. Shipway and I. M. Hutchings, Powder Technology 76 (1993) 23-30, Attrition of brittle spheres by fracture under compression and impact loading.
• I. M. Hutchings, Proc. ISATA Conf. on New and Alternative Materials for the Automotive Industries, Aachen (1993) 533-538, Tribological properties of metal-matrix composites.
• I. M. Hutchings and P. H. Shipway, Proc. ISATA Conf. on New and Alternative Materials for the Automotive Industries, Aachen (1993) 165-170, Improved method of testing durability and adhesion of paints and other coatings.
• T. Wakabayashi, J. A. Williams and I. M. Hutchings, Surface and Coatings Technology 57 (1993) 183-189, The action of gaseous lubricants in the orthogonal machining of an aluminium alloy by titanium nitride coated tools.
• D. A. J. Ramm, I. M. Hutchings and T. W. Clyne, J. de Physique IV, C7/3 (1993) 913-919, Erosion resistance and adhesion of composite metal/ceramic coatings produced by plasma spraying.
• I. M. Hutchings, Powder Technology 76 (1993) 3-13, Mechanisms of wear in powder technology.
• I. M. Hutchings, Materials Science and Technology 9 (1993) 929-930, Quick non-graphical method for deducing slip systems in cubic close packed metals in tension or compression.

  1992

• I. M. Hutchings, in Erosion of Ceramic Materials, ed. J. E. Ritter, Key Engineering Materials 71 75-92, Trans Tech Publications, 1992, Transitions, threshold effects and erosion maps.
• J. C. Arnold and I. M. Hutchings, J. Phys. D: Appl. Phys. 25 (1992) A222-A229, A model for the erosive wear of rubber at oblique impact angles.
• I. M. Hutchings, J. Phys. D: Appl. Phys. 25 (1992) A212-A221, Ductile-brittle transitions and wear maps for the erosion and abrasion of brittle materials.
• P. M. Rogers, I. M. Hutchings and J. A. Little, Wear 154 (1992) 269-285, Surface features on a low-alloy steel exposed in a simulated fluidized bed combustor environment.
• X. X. Zhang, I. M. Hutchings and T. W. Clyne, Proc. 2nd European Conf. on Advanced Materials and Processes, Euromat 1991, Inst. of Materials, (1992) vol. 1, 332-337, The effect of deposition conditions on the erosive wear resistance of plasma sprayed alumina coatings.
• I. M. Hutchings, Proc. 2nd European Conf. on Advanced Materials and Processes, Euromat 1991, Inst. of Materials, (1992) vol.2, 56-64, Abrasive and erosive wear of metal-matrix composites.
• A. J. Sparks and I. M. Hutchings, J. Mater. Sci. Lett. 11 (1992) 918-920, Fracture due to repeated indentation in soda-lime glass.
• T. Wakabayashi, J. A. Williams and I. M. Hutchings, in Tribology in Metal-cutting and Grinding, Mechanical Engineering Publications, 1992, 33-40, The action of gaseous lubricants in metal cutting.
• P. M. Rogers, I. M. Hutchings and J. A. Little, Surface Engineering 8 (1992) 48-54, TiN coatings for protection against combined wear and oxidation.
• A. P. Mouritz and I. M. Hutchings, J. Mater. Sci. Letters 11 (1992) 1100-1103, Compressive failure of silica-filled epoxy resins: influence of matrix strength, interfacial bond strength and porosity.

  1991

• P. H. Shipway and I. M. Hutchings, Wear of Materials 1991, ed. K. C. Ludema and R. G. Bayer, ASME, New York, 1991, 63-70, The influence of particle properties on the erosive wear of sintered boron carbide. Also pub. in Wear 149 (1991) 85-98.
• A. J. Sparks and I. M. Hutchings, Wear of Materials 1991, ed. K. C. Ludema and R. G. Bayer, ASME, New York, 1991, 367-374, Transitions in the erosive wear behaviour of a glass-ceramic. Also pub. in Wear 149 (1991) 99-110.
• J. B. Zu, G. T. Burstein and I. M. Hutchings, Wear of Materials 1991, ed. K. C. Ludema and R. G. Bayer, ASME, New York, 1991, 417-424, A comparative study of the slurry erosion and free-fall particle erosion of aluminium. Also pub. in Wear 149 (1991) 73-84
• I. M. Hutchings, J. A. Little and A. J. Ninham, Proc 4th Berkeley Conf. on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, ed. A. V. Levy, NACE, (1991) 14-1 - 14-17, Low-velocity erosion-corrosion of steels in a fluidized bed.
• A. J. Ninham, J. A. Little, I. M. Hutchings, D. B. Meadowcroft, J. Oakey and N. J. Simms, Proc 4th Berkeley Conf. on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, ed. A. V. Levy, NACE, (1991) 23-1 - 23-12, Temperature gradient effects in erosion-corrosion.
• P. M. Rogers, P. H. Shipway, I. M. Hutchings and J. A. Little, Proc 4th Berkeley Conf. on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, ed. A. V. Levy, NACE, (1991) 35-1 - 35-15, The erosion-corrosion of sprayed alumina coatings on a low-chromium steel.
• J. C. Arnold and I. M. Hutchings, J. Natural Rubber Research 6 (1991) 241-256, The erosive wear of elastomers.

  1990

• A. J. Ninham, I. M. Hutchings and J. A. Little, Corrosion 46 (1990) 296-301, Erosion/oxidation of austenitic and ferritic alloys.
• P. M. Rogers, I. M. Hutchings and J. A. Little, Proc. EMAG-MICRO89, Inst. of Physics Conf. Series No. 98, (1990), ed. P.J. Goodhew and H.Y. Elder, 175-178, Microstructure and growth of thin oxide scales formed on low chromium steels during erosive-corrosive degradation.
• A. J. Ninham, J.A. Little and I. M. Hutchings, Materials Science and Technology 6 (1990) 69-72,The mechanical properties of scales formed under combined erosion and corrosion.
• I. M. Hutchings, in Reibung und Verschleiþ bei metallischen und nichtmetallischen Werkstoffen, ed. K.-H. Zum Gahr, Deutsche Gesellschaft fur Materialkunde, (1990) 3-14, Wear in the next decade.
• A. G. Wang and I. M. Hutchings, in Metal and Ceramic Matrix Composites: Processing, Modeling and Mechanical Behaviour, ed. R. B. Bhagat, A.H. Clauer, P. Kumar and A. M. Ritter, TMS (1990) 499-508, Erosion of short delta-alumina fibre aluminium metal matrix composites by solid particles.
• J. B. Zu, I. M. Hutchings and G. T. Burstein, Wear 140 (1990) 331-344, Design of a slurry-erosion test rig.
• I. M. Hutchings and A. Wang, in New Materials and their Applications, ed. D. Holland, Inst. of Phys. Conf. Series 111 (1990) 91-100, Wear of aluminium-alumina metal-matrix composites by abrasion and erosion.
• M.J. Entwisle, J. Gibb, I.M. Hutchings, J.A. Little, D.B. Meadowcroft, A.J. Ninham, J. Oakey, N. Simms, in High Temperature Materials for Power Engineering 1990, ed. E. Bachelet et al., Kluwer, Dordrecht (1990) 239-248, The laboratory simulation of fluidized bed tube wastage.
• P.M. Rogers, I.M.Hutchings and J.A. Little, in Surface Engineering, ed. S.A. Meguid, Elsevier, (1990) 29-38, The erosion-corrosion of a nitrocarburized low alloy steel.
• P. Mouritz and I. M. Hutchings, Proc. Conf. Materials United in the Service of Man, Perth, Australia, ed. R. D. Davies and D. I. Hatcher, Institute of Metals and Materials Australasia, (1990) 8-3.1 - 8-3.15, The abrasive wear of rock drill bit materials.
• Y. Oka and I. M. Hutchings, Boshoku Gijutsu 39 (1990) 610-616, Dependence on material hardness of erosion by solid particle impact (in Japanese).
• M.I. Qureshi, I. M. Hutchings and M. Ajmal, Advanced Materials, Proc. First Int. Symp., Islamabad, September 1989, ed. A. ul Haq, N. Ahmad and A. Q. Khan, (1990) 248-254, Influence of cyclic deformation on the shape memory and transformation characteristics of a ternary CuZnAl alloy.
• D. M. Elliott and I. M. Hutchings, in Mechanics of Coatings, ed. D. Dowson, C. M. Taylor and M. Godet, Tribology Series No. 17, Elsevier (1990) 445-449, Deformation and fracture of hard coatings during plastic indentation.
• J. C. Knight, T. F. Page and I. M. Hutchings, Surface Engineering 6 (1990) 55, The surface deformation behaviour of TiC and TiN coated steels: Part II - Scratch response and friction.

  1989

• J. C. Arnold and I. M. Hutchings, J. Mat. Sci. 24 (1989) 833, Flux rate effects in the erosive wear of elastomers.
• J. Li and I. M. Hutchings, Wear of Materials 1989, ASME, ed. K.C. Ludema (1989), Resistance of cast polyurethane elastomers to solid particle erosion. Also pub. in Wear 135 (1990) 293.
• A. G. Wang and I. M. Hutchings, Wear 129 (1989) 23, The number of particle contacts in two-body abrasive wear of metals by coated abrasive papers.
• A. G. Wang and I. M. Hutchings, Mat. Sci. Tech. 5 (1989) 71, Wear of alumina fibre-aluminium metal matrix composites by two-body abrasion.
• S. P. Timothy and I. M. Hutchings, Proc. Int. Conf. on Mech. Props. at High Rates of Strain, Oxford 1989, ed. J. Harding, Inst. of Physics Conf. Series 102 (1989) 127, Formation of adiabatic shear bands by the impact of wedges and cones.
• J. C. Arnold and I. M. Hutchings, Wear of Materials 1989, ASME, New York, ed. K. C. Ludema (1989) 99, The mechanisms of erosion of unfilled elastomers by solid particle impact. Also pub. in Wear 138 (1990) 33-46.
• A. P. Mouritz and I. M. Hutchings, Wear of Materials 1989, ASME, New York, ed. K. C. Ludema, (1989) 41, The abrasive wear of steel during rolling-sliding contact with rock counterfaces. Also pub. in Wear 134 (1989) 99.
• A. J. Ninham and I. M. Hutchings, Wear of Materials 1989, ASME, New York, ed. K. C. Ludema, (1989) 121, Solid particle erosion of boronized steels.
• A. P. Mercer and I. M. Hutchings, Wear 132 (1989) 77, The deterioration of bonded abrasive papers during the wear of metals.
• A. P. Mouritz and I.M. Hutchings, Proc. 5th Int. Conf. on Tribology, Eurotrib 89, 2 (1989) 40, The influence of load on the abrasive wear of steels during combined rolling and sliding against rock counterfaces.
• N. F. Roberts and I. M. Hutchings, in K. Holmberg and I. Nieminen (eds.), Proc. 5th Int. Conf. on Tribology, Eurotrib 89, 2 (1989) 307-315, Erosion of polycrystalline alumina by solid particle impact.
• J. C. Knight, T. F. Page and I. M. Hutchings, Thin Solid Films 177 (1989) 117, Influence of substrate hardness on the response of TiN-coated steels to surface deformation.
• J. C. Knight, T. F. Page and I. M. Hutchings, Surface Engineering 5 (1989) 213, The surface deformation behaviour of TiC and TiN coated steels: Part I - Indentation response.
• J. Li, S. Y. Chen, Z. Y. Mao, I. M. Hutchings and J. A. Charles, Foundry Trade Journal, July 1989, 538, The direct quenching of Hadfield steel castings.
• A. J. Ninham, M. J. Entwisle, I. M. Hutchings and J.A. Little, Proc. Int Conf. on Fluidized Bed Combustion, San Francisco, 1989, ASME, New York, 583-589. A laboratory-scale fluidized bed rig for high temperature tube wastage studies.
• A. J. Ninham, I. M. Hutchings and J. A. Little, Corrosion 89, NACE, Houston (1989) paper 544, Erosion-corrosion of austenitic and ferritic alloys in a fluidized bed environment.

  1988

• A.P. Mercer and I.M. Hutchings Wear 124 (1988)165-176, The influence of atmospheric composition on the abrasive wear of titanium and Ti-6A1-4V
• I. M. Hutchings and A. G Wang, Phil. Mag. A57 (1988) 197, Fracture under point loading of brittle fibres in a ductile matrix.
• J. C. Arnold and I. M. Hutchings, Wear 128 (1988) 339, Electron beam damage in scanning electron microscopy of worn elastomer surfaces.
• X. X. Zhang, I. M. Hutchings and T. W. Clyne, Proc. Int. Conf. Plasma Spraying, Paris, Nov. 1988, The resistance of plasma-sprayed alumina coatings to solid particle erosion.

  1987

• J. E. Field and I. M. Hutchings, in Materials at High Strain Rates, ed. T. Z. Blazynski, Elsevier App. Sci., 1987, ch.7, Surface Response to Impact.
• I. M. Hutchings, in Tribology in Particulate Technology, ed. B. J. Briscoe and M. J. Adams, Adam Hilger, 1987, ch.4.7, Surface Impact Damage.
• A. G. Wang and I. M. Hutchings, Wear of Materials 1987, ASME, New York, ed. K. C. Ludema, Mechanisms of abrasive wear in a boronized alloy steel. Also pub. in Wear 124 (1988) 149.
• I. M. Hutchings, D. W. T. Deuchar and A. H. Muhr, J. Mat. Sci. 22 (1987) 4071, Erosion of unfilled elastomers by solid particle impact.
• M. J. Entwisle, I. M. Hutchings and J. A. Little, Proc. 7th Int. Conf. on Erosion by Liquid and Solid Impact, ed. J. E. Fields and J. P. Dear, 1987, paper 71, Evaluation of a novel fluidized bed erosion rig.
• J. A. Little, I. M. Hutchings and M. J. Entwisle, Proc. Conf. on Corrosion, Erosion and Wear of Materials at Elevated Temperatures, Berkeley, California, 1986, ed. A. V. Levy, NACE, (1987), 324 Erosion-corrosion testing of fluidized bed combustor materials: a new experimental method.
• S. P. Timothy, J. M. Pearson and I. M. Hutchings, Int. J. Mech. Sci. 29 (1987) 713, The contact pressure distribution during plastic compression of lead spheres.
• I. M. Hutchings, Chem. Eng. Sci. 42 (1987), 869, Wear by Particulates.

  1986

• S. P. Timothy and I. M. Hutchings, J. Mat. Sci. Letters 5 (1986) 453, Adiabatic shear band fractures surfaces in a titanium alloy.
• S. P. Timothy and I. M. Hutchings, Phil. Mag., A 54 (1986), 93, The impact of a soft metal sphere on a hard metal target: I - Deformation of the sphere.
• S. P. Timothy and I. M. Hutchings, Phil. Mag. A 54 (1986), 103, The impact of a soft metal sphere on a hard metal target: II - Deformation of the target.
• I. M. Hutchings and A. V. Levy, Proc. Conf. on Corrosion, Erosion and Wear of Materials at Elevated Temperatures, Berkeley, California, 1986, ed. A. V. Levy, NACE, (1987), 121, Thermal effects in the erosion of ductile metals. Also pub. in Wear 131 (1989) 105.
• A. J. Ninham and I. M. Hutchings, J. Vac. Sci. Technol. A4 (1986), 2827, On the morphology of thermochemically produced Fe2B/Fe interfaces.

  1985

• A. P. Mercer and I. M. Hutchings, Wear of Materials 1985, (ed. K. C. Ludema), ASME, New York, 332 The influence of atmospheric humidity on the abrasive wear of metals. (Also pub. in Wear 103 (1985) 205.
• S. P. Timothy and I. M. Hutchings, Materials Science and Technology 1 (1985), 526, Initiation and growth of microfractures along adiabatic shear bands in Ti-6Al-4V.

  1984

• M. M. Chaudhri, I. M. Hutchings and P. L. Makin, Phil. Mag. 49 (1984) 493, Plastic compression of spheres.
• M. M. Chaudhri and I. M. Hutchings, J. Mat. Sci. Letters 3 (1984) 79, Strength measurements on rapidly solidified metal particles.
• S. P. Timothy and I. M. Hutchings, in Mechanical Properties at High Rates of Strain 1984 (ed. J. Harding), Inst. of Phys. Conf. Series 70 (1984) 397, Adiabatic shear bands in a titanium alloy resulting from ballistic impact at high and low temperatures.
• J. E. Field and I. M. Hutchings, in Mechanical Properties at High Rates of Strain 1984 (ed. J. Harding), Inst. of Phys. Conf. Series 70 (1984) 349, Impact erosion processes.
• S. P. Timothy and I. M. Hutchings, Proc. 8th Int. Conf. on High Energy Rate Fabrication, San Antonio, ASME, New York, (1984) 31, The effect of anisotropy on adiabatic shear band trajectories in titanium alloys.
• S. P. Timothy and I. M. Hutchings, Fatigue of Eng. Matls. and Structures 7 (1984) 223, Influence of adiabatic shear bands on the fatigue strength of a titanium alloy.
• S. N. Kukureka and I. M. Hutchings, Int. J. Mech. Sci. 26 (1984) 617, Mechanical properties of engineering polymers at strain rates up to 500 s-1.
• S. P. Timothy and I. M. Hutchings, Acta Metallurgica 33 (1984) 667, The structure of adiabatic shear bands in a titanium alloy.

  1983

• I. M. Hutchings, J. of Microscopy 130 (1983) 331, An introduction to the microscopy of erosion.
• I. M. Hutchings, in Materials Behaviour under High Stress and Ultra-high Loading Rates (ed. J. Mescall and V. Weiss), Plenum Press (1983) 161, The behaviour of metals under ballistic impact at sub-ordnance velocities.
• A. K. Cousens and I. M. Hutchings, Wear of Materials 1983, ASME (1983) 382, A critical study of the erosion of an aluminium alloy by solid spherical particles at normal impingement (also pub. in Wear 88 (1983) 335).
• A. K. Cousens and I. M. Hutchings, Proc. 6th Int. Conf. on Erosion by Liquid and Solid Impact, Cambridge (1983) (ed. J. E. Field and N. S. Corney), Cavendish Laboratory, Cambridge, 41.1, Influence of erodent particle shape on the erosion of mild steel.
• S. P. Timothy and I. M. Hutchings, Proc. 6th Int. Conf. on Erosion by Liquid and Solid Impact, Cambridge (1983 (ed. J. E. Field and N. S. Corney), Cavendish Laboratory, Cambridge, 43.1, Scale effects in adiabatic shear banding caused by normal and oblique impact.
• A. J. Ninham and I. M. Hutchings, Proc. 6th Int. Conf. on Erosion by Liquid and Solid Impact, Cambridge (1983) (ed. J. E. Field and N. S. Corney), Cavendish Laboratory, Cambridge, 50.1, A computer model for particle velocity calculation in erosion testing.
• I. M. Hutchings, Tribology in the 80s, NASA CP2300 (1983) 236, Microstructures associated with wear (invited discussion).

  1982

• I. M. Hutchings and A. K. Cousens, Proc. Int. Conf. on Wear of Machines by Hard Particles, Prague (1982), Erosion of an aluminium alloy by spherical particles at normal impact.

  1981

• I. M. Hutchings, Wear 70 (1981) 269, A model for the erosion of metals at normal incidence by spherical particles (Also published as Rept. LBL-12014, Lawrence Berkeley Lab., Univ. of California)
• I. M. Hutchings and T. J. O'Brien, Int. J. Mech. Sci. 23 (1981) 255, Normal impact of metal projectiles against a rigid target at low velocities.
• I. M. Hutchings, N. H. Macmillan and D. G. Rickerby, Int. J. Mech. Sci. 23 (1981) 639, Further studies of the oblique impact of a hard sphere against a ductile solid.
• S. N. Kukureka and I. M. Hutchings, Proc. 7th Int. Conf. on High Energy Rate Fabrication, Leeds (ed. T. Z. Blazynski) (1981) 29, Measurement of the mechanical properties of polymers at high strain rates by Taylor impact.
• S. P. Timothy and I. M. Hutchings, Proc. 7th Int. Conf. on High Energy Rate Fabrication, Leeds (ed. T. Z. Blazynski) (1981) 19, Microstructural features associated with ballistic impact in Ti-6Al-4V.

  1980

• I. M. Hutchings, Mécanique, Matériaux, Electricité 365 (1980) 185, Recent advances in the understanding of solid particle erosion.
• M. R. Jolly and I. M. Hutchings, Proc. 14th Int. Cong. on High-speed Photography, Moscow (1980), Observation of the melt-spinning process for the production of rapidly solidified tin alloys (+ 16 mm film).
• P. G. Towson and I. M. Hutchings, Proc. Conf. on Lubrication, Friction and Wear, Inst. of Engrs., Melbourne, Australia (1980) 65, The particle size effect in the erosion of copper by solid particle impact.

  1979

• I. M. Hutchings, in Erosion: Prevention and Useful Applications, ASTM STP 664 (1979) 59, Mechanisms of the erosion of metals by solid particles.
• I. M. Hutchings, J. Mech. Phys. Solids 26 (1979) 289, Estimation of the yield stress of polymers at high strain rates using G.I.Taylor's impact technique.
• I. M. Hutchings, J. Phys. D: Appl. Phys. 12 (1979) 1819, Energy absorbed by elastic waves during plastic impact.
• I. M. Hutchings, Proc. Conf. on Corrosion-Erosion of Coal Conversion System Materials, NACE (1979) 393, Mechanical and metallurgical aspects of the erosion of metals.
• I. M. Hutchings, Proc. 5th Int. Conf. on Erosion by Liquid and Solid Impact (1979) 36.1, Some comments on the theoretical treatment of erosive particle impacts.

  1978

• I. M. Hutchings and D. A. Andrews, Proc. 13th Int. Cong. on High-speed Photography and Photonics, Tokyo (1978) 222, Light-emitting diodes as short duration light sources.

  1977

• I. M. Hutchings, Int. J. Mech. Sci. 19 (1977) 45, Deformation of metal surfaces by the oblique impact of square plates.
• I. M. Hutchings, M. C. Rochester and J.-J. Camus, J. Phys. E: Sci. Instr. 10 (1977) 455, A rectangular-bore gas gun.
• J. E. Field, I. M. Hutchings and D. A. Gorham, Record of Int. Cong. on Instrumentation in Aerospace Simulation Facilities, IEEE (1977) 142, Instrumentation for impact, erosion and fracture studies.
• I. M. Hutchings, J. Phys. D: Appl. Phys. 10 (1977) L179, Strain-rate effects in microparticle impact.
• I. M. Hutchings, Rev. Sci. Instr. 48 (1977) 923, Direct display of gas gun projectile velocity.
• I. M. Hutchings, Proc. 12th Int. Cong. on High-speed Photography, Toronto, 1976, SPIE 97 (1977) 358, The erosion of metals by solid particles - a study using high-speed photography.

  1976

• I. M. Hutchings, R. E. Winter and J. E. Field, Proc. Roy. Soc. A348 (1976) 379, Solid particle erosion of metals: the removal of surface material by spherical projectiles.
• I. M. Hutchings, Int. J. Mech. Sci. 18 (1976) 243, The ricochet of spheres and cylinders from the surface of water.
• B. J. Briscoe and I. M. Hutchings, Polymer 17 (1976) 1099, Impact yielding of high density polyethylene.

  1975

• I. M. Hutchings and R. E. Winter, J. Phys. D: Appl. Phys. 8 (1975) 8, The erosion of ductile metals by spherical particles.
• I. M. Hutchings and R. E. Winter, J. Phys. E: Sci. Instr. 8 (1975) 84, A simple small-bore laboratory gas gun.
• R. E. Winter and I. M. Hutchings, Wear 34 (1975) 141, The role of adiabatic shear in solid particle erosion.
• I. M. Hutchings, Wear 35 (1975) 371, Prediction of the resistance of metals to erosion by solid particles.

  1974

• I. M. Hutchings, Ph.D. Dissertation, University of Cambridge, 1974, The erosion of ductile metals by solid particles.
• I. M. Hutchings and R. E. Winter, Wear 27 (1974) 121, Particle erosion of ductile metals: a mechanism of material removal.
• R. E. Winter and I. M. Hutchings, Wear 29 (1974) 181, Solid particle erosion studies using single angular particles.
• J. E. Field, H. M. Hauser, I. M. Hutchings and A. C. Woodward, Industrial Diamond Review, July 1974, 255, Strength testing of diamond. (Also pub. in Industrie Diamanten Rundschau, 8 (1974) 134)

Books, monographs and edited works

• I.M. Hutchings, Monograph on the Erosion of Materials by Solid Particle Impact, Materials Technology Institute of the Chemical Process Industries, Publication No. 10 (1983).
• I.M. Hutchings, Monograph on the Erosion of Materials by Liquid Flow, Materials Technology Institute of the Chemical Process Industries, Publication No. 25 (1986).
• I.M. Hutchings, Tribology: Friction and Wear of Engineering Materials, Edward Arnold, UK (1992), (co-published by CRC Press, Boca Raton, USA).
• I. M. Hutchings (ed.), Tribology International 26(5) (1993), Special Issue on Tribology in Particle Technology, pp. 303-366.
• I. M. Hutchings and J. A. Little (eds.), Wear 186-187 (1995), Proceedings of Eighth International Conference on Erosion by Liquid and Solid Impact, Cambridge, September 1994.
• I. M. Hutchings (ed.), Tribology International 30(7) (1997), Special Issue on Scratch Testing, pp. 467-516.
• I. M. Hutchings (ed.), New directions in tribology, MEP, Bury St Edmunds, 1997, pp. 500
• I. M. Hutchings (ed.), Tribology Letters 3(4) (1997), New directions in tribology, pp. 297-326.

Patents

• I. M. Hutchings, UK patent GB2194256 (1991), Strain indication in webbing straps and ropes (see also Eureka 9 (1989) 25) (Semi-finalist award in Toshiba/Design Council Year of Invention competition, 1989).
• G. T. Burstein, K. Sasaki and I. M. Hutchings, UK patent application GB0023396.5 (2000), Electrochemical surface treatment of metals and metallic alloys.
• Y. Kusano and I.M. Hutchings, Japanese patent application 2000-170547 (2000), Method of and apparatus for measuring hardness and elastic modulus of thin film.

General Interest

• I. M. Hutchings, New Scientist, 2 March 1978, 563-567, Bouncing bombs of the Second World War.