Institute for Manufacturing

Inkjet Research Centre

Inkjet Research Centre: Publications

  • A. Berson, E.L. Talbot, P.S. Brown, C.D. Bain, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 290-293, 'Experimental investigation of the impact, spreading and drying of picolitre droplets onto substrates with a broad range of wettabilities'.
  • E. S. Betton, W.-K. Hsiao, G. D. Martin and I. M. Hutchings, J. Imaging Science and Technology, Vol 55, 2011, 050606. 'Behavior of ink-jet printed drops on a corona-treated polymeric film substrate'.
  • E. S. Betton, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 301-304, 'The effects of corona treatment on impact and spreading of ink-jet drops on a polymeric film substrate'.
  • J. R. Castrejon-Pita, S. D. Hoath, A. A. Castrejon-Pita, N. F. Morrison, W.-K. Hsiao and I. M. Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 93-96, 'Ultra-High Speed Particle Image Velocimetry on Drop-on-Demand Jetting'.
  • J. R. Castrejon-Pita, E. S. Betton, K. J. Kubiak, M. C. T. Wilson, and I. M. Hutchings, Biomicrofluidics 5 (2011) 014112, 'The dynamics of the impact and coalescence of droplets on a solid surface'.
  • R. Castrejon-Garcia, J.R. Castrejon-Pita, G.D. Martin, and I. M. Hutchings, Revista Mexicana de Fisica 57, 266 (2011), 'The shadowgraph imaging technique and its modern application to fluid jets and drops'
  • J. R. Castrejon-Pita, N. F. Morrison, O. G. Harlen, G. D. Martin and I. M. Hutchings, Physical Review E 83 (2011) 036306, 'Experiments and Lagrangian simulations on the formation of droplets in drop-on-demand mode'.
  • J. R. Castrejon-Pita, N. F. Morrison, O. G. Harlen, G. D. Martin and I. M. Hutchings, Physical Review E 83 (2011) 016301, 'Experiments and Lagrangian simulations on the formation of droplets in continuous mode'.
  • J. R. Castrejon-Pita,, G. D. Martin and I. M. Hutchings, J. Imaging Science and Technology 2011, vol 55, 040305. 'Experimental study of the influence of nozzle defects on drop-on-demand ink-jets'.
  • J. R. Castrejon-Pita,, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 14-17, 'Influence of nozzle defects on drop-on-demand ink-jets'.
  • Castrejon-Pita, J.R., G.D. Martin, and I.M. Hutchings. A large-scale print-head for drop-on-demand and continuous inkjet studies. in International Conference on Non-Impact Printing, NIP25, 2009, Louisville, USA, pp. 107-110.
  • Castrejon-Pita, J.R., Martin, G.D., Hoath, S.D. and I.M. Hutchings, A simple large-scale droplet generator for studies of inkjet printing. Review of Scientific Instruments, 2008. 79 (7), p. 075108
  • Costa, H.L. and I.M. Hutchings. Ink-jet printing for patterning engineering surfaces. in International Conference on Non-Impact Printing, NIP24. 2008. Pittsburgh, USA. pp.256-259.
  • Etienne, J., Hinch, E.J. and Li, J. A Lagrangian-Eulerian approach for the numerical simulation of free-surface flow of a viscoelastic material. Journal of Non-Newtonian Fluid Mechanics, 2006. 136(2-3): p. 157-166.
  • Harlen, O., Morrison, N., Yarlanki, S. and Hoath, S., Jet break-up of polymeric fluids in inkjet printing (presentation), in Institute for Mathematics and its Applications Annual Program Year Workshop on Flowing Complex Fluids: Fluid Mechanics-Interaction of Microstructure and Flow. 2009: University of Minnesota
  • S. D. Hoath, W.-K. Hsiao, S. Jung, G. D. Martin and I. M. Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 62-65, 'Dependence of drop speed on nozzle diameter, viscosity and drive amplitude in drop-on-demand ink-jet printing'.
  • S. D. Hoath, W-K Hsiao, J. R. Castrejon-Pita, D. M. Colgate, S. Jung, I. M. Hutchings, L. Yang, N. F. Morrison, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 23-27, 'Jet diameters and velocity profiles in continuous ink-jets'.
  • Hoath, S., Martin, G., Castrejon-Pita, R. and Hutchings, I. 'Drop and satellite formation in drop-on-demand printing of polymer solutions' in International Conference on Non-Impact Printing, NIP23, 2007, Anchorage, pp. 331-335
  • S. D. Hoath, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 10-13, 'Effects of fluid viscosity on drop-on-demand ink-jet break-off'.
  • Hoath, S.D., Martin, G.D., Tuladhar, T., Mackley, M.R. and Hutchings, I.M., Links between fluid rheology and drop-on-demand jetting and printability. in International Conference on Non-Impact Printing, NIP24, 2008. Pittsburgh, PA, ISBN 978-0-89208-280-3, pp.130-133
  • Hoath, S.D., I.M. Hutchings, and G.D. Martin. Drop-on-demand jetting of dilute polymer solutions. in 3rd International Inkjet Printing Workshop. 2007. Eindhoven. (presentation)
  • Hoath, S.D., Hutchings, I.M., Martin, G.D., Harlen, O., Tuladhar, T., Mackley, M., Vadillo, D., Knott, M., McLeish, T., Influence of polymer molecular weight on inkjet fluid jets. Journal of Polymer Science B: Polymer Physics, 2009 in prep.
  • Hoath, S.D. Hutchings, I.M., Martin, G.D., Tuladhar, T.R., Mackley, M.R., Vadillo, D., Links between ink rheology, drop-on-demand jet formation, and printability. Journal of Imaging Science and Technology, 53 (4), 2009, p. 041208.
  • Hoath, S.D., Martin. G.D., Castrejon-Pita, R. and Hutchings, I.M., Satellite formation in drop-on-demand printing of polymer solutions. in International Conference on Non-Impact Printing, NIP23, 2007. Anchorage, USA, ISBN 0-89208-273-9, pp.331-335.
  • S. D. Hoath, G. D. Martin and I. M. Hutchings, Proc 26th Int. Conf. on Digital Printing Technologies, NIP26, Austin, TX, USA, 2010, 353-355, 'Improved models for drop-on-demand ink-jet shortening'.
  • Hoath, S.D., G.D. Martin, and I.M. Hutchings, Methods & Results from the Cambridge Inkjet Research Centre, in NanoTech2009. 2009, Houston.
  • Hoath, S.D., G.D. Martin, and I.M. Hutchings, Methods & Results from the Cambridge Inkjet Research Centre. Soft Matter, 2009 in prep.
  • Hoath, S.D.,Martin, G.D.and Hutchings, I.M.. A model for jet shortening in drop-on-demand inkjet printing. in International Conference on Non-Impact Printing, NIP25, 2009, Louiseville, USA, pp.75-78.
  • Hon, K.K.B., L. Li, and I.M. Hutchings, Direct writing technology-Advances and developments. CIRP Annals - Manufacturing Technology, 2008. 57(2): p. 601-620.
  • W.-K. Hsiao, S. D. Hoath, G. D Martin and I. M Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 66-69, 'Jetting, In-Nozzle Meniscus Motion and Nozzle-Plate Flooding in an Industrial Drop-on-Demand Print Head.'
  • W.-K. Hsiao, S. D. Hoath, G. D. Martin, I. M. Hutchings, N. B. Chilton and S. Jones, Proc Nanotech 2011 Conference, Boston, June 2011, 'Imbibition dynamics of nano-particulate ink-jet drops on micro-porous media'.
  • Hsiao, W.K., Martin, G.D., Hoath, S.D. and Hutchings, I.M., Inkjet printing for direct mask deposition in printed circuit board fabrication. Journal of Imaging Science and Technology, 53(5), 2009, p. 050304
  • Hsiao, W.K., Martin, G.D., Hoath, S.D., Hutchings, I.M., Ink drop deposition and spreading in inkjet-based printed circuit board fabrication. in International Conference on Non-Impact Printing, 2008, Pittsburgh, USA, pp.667-670, ISBN 978-0-89208-280-3
  • Hutchings, I.M., Ink-jet printing in micro-manufacturing: opportunities and limitations, in Proc. 4M/ICOMM Int. Conf. on Multi-material Micro Manufacture (4M/ICOMM 2009). 2009, Cardiff University: Karlsruhe, Germany. DOI:10.1243/17547164C0012009006
  • Hutchings, I.M., G.D. Martin, and S.D. Hoath, High speed imaging and analysis of jet and drop formation. Journal of Imaging Science and Technology, 2007. 51(5): p. 438-444.
  • Hutchings, I.M., Martin, G.D., Hoath, S.D., and Morgan, R.H.. High speed imaging and analysis of jet and drop formation. in International Conference on Non-Impact Printing, NIP22, 2006, Denver, USA, pp. 91-94
  • S. Jung, S. D. Hoath, G. D. Martin and I. M. Hutchings, Journal of Non-Newtonian Fluid Mechanics 166 (2011) 297-306 , 'Experimental study of atomization patterns produced by the oblique collision of two viscoelastic liquid jets'.
  • Jung, S.-J., Hoath, S.D., Martin, G.D. and Hutchings, I.M., A new method to assess the jetting behaviour of drop-on-demand inkjet fluids. in International Conference on Non-Impact Printing, NIP25, 2009,Louisville, Kentucky, USA, pp.719-722.
  • Jung, S., Hoath, S.D., Martin, G.D. and Hutchings, I.M., Atomisation patterns produced by the oblique collision of two Newtonian liquid jets. Physics of Fluids, 2010, 22, p. 042101.
  • S. Jung, S. D. Hoath, G. D. Martin and I. M. Hutchings, Journal of Imaging Science and Technology 55(1) (2011) 010501-010501-6, 'A new method to assess the jetting behavior of drop-on-demand inkjet fluids'.
  • Mackley, M.R. and T.R. Tuladhar. Filament stretching of polymeric and ink jet fluids. in Lodge Commemorative Meeting on Rheometry. 2006. Cardiff.(presentation)
  • G. D. Martin, J. R. Castrejon-Pita and I. M. Hutchings, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 620-623, 'Holographic Measurement of Drop-on-Demand Drops in Flight'.
  • Martin, G.D., Inkjet and its application to fabrication, in Direct Write Association Conference. 2007: Durham.(presentation)
  • Martin, G.D., Introduction to Inkjet, in Global Inkjet Printing Conference. 2007: Prague. (presentation)
  • Martin, G.D., Surface modification and device fabrication using inkjet, in NASM2007. 2007, IOP: Southampton. (presentation)
  • Martin, G.D., Introduction to Inkjet, in Global Inkjet Printing Conference. 2008: Budapest. (presentation)
  • Martin, G.D. Advances in understanding the printing performance of ink jet fluids. in Inkjet technology showcase. 2009. Zurich.
  • Martin, G.D., S.D. Hoath, and I.M. Hutchings, Inkjet printing - the physics of manipulating liquid jets and drops. Journal of Physics: Conference Series, 2008. 105: p. 012001.
  • Martin, G.D., I.M. Hutchings, and S.D. Hoath. Jet formation and late-stage ligament instability in drop-on-demand printing. in International Conference on Non-Impact Printing, NIP22, 2006. Denver, USA, pp. 95-98.
  • Martin, G.D., et al., Analytical high speed imaging of jets and drops, in Printing of Functional Materials. 2006: Manchester. (presentation)
  • N.F. Morrison, O.G. Harlen, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 360-364, 'Inkjet printing of non-Newtonian fluids'.
  • Morrison, N.F. and O.G. Harlen, Viscoelasticity in Inkjet Printing. Rheologica Acta, 2009 (accepted)
  • Morrison, N.F. and O.G. Harlen. Viscoelasticity in Inkjet Printing. in Pan-American Congress of Applied Mechanics. 2010 (accepted)
  • Stringer, J. and B. Derby, The Formation and Stability of Lines Produced by Inkjet Printing. Langmuir, 2010, 26, 10365-10372.
  • Stringer, J. and B. Derby, Limits to feature size and resolution in ink jet printing, Journal of the European Ceramic Society 29 (2009) 913-918
  • Stringer, J. and B. Derby, Prompt splashing of droplets on rough substrates, Physics of Fluids, revised manuscript submitted.
  • Stringer, J. and B. Derby, Splashing of droplets on structured surfaces NIP23, Anchorage, Alaska, 2007.
  • Stringer, J. and B. Derby, Predicting the morphology of adjacent inkjet printed droplets, Dynamics of Printed Drops, Institute of Physics, London, UK, 2008.
  • Tembely, M., Vadillo, D., Mackley, M.R. and Soucemarianadin, A., The matching of a "one-dimensional" numerical simulation and experiment results for low viscosity Newtonian and non-Newtonian fluids during fast filament stretching and subsequent break-up, J. Rheol. 2012 56(1), 159-183.
  • Tuladhar, T., Mackley, M., Etienne, J., Hinch, J., Yarlanki, S. and Harlen, O., The filament stretching of Newtonian and viscoelastic solutions: matching numerical simulations with experiments. Journal of Non Newtonian Fluid Mechanics, 2009 in prep. (status not yet published)
  • Tuladhar, T.R. and M.R. Mackley, Filament stretching rheometry and break-up behaviour of low viscosity polymer solutions and inkjet fluids. Journal of Non-Newtonian Fluid Mechanics, 2008. 148(1-3): p. 97-108.
  • Vadillo, D., M.R. Mackley, and T. Tuladhar, The quantification of ink jet fluid viscoelasticity and its effect on drop formation, in Dynamics of Printed Drops. 2008, Institute of Physics: London. (presentation)
  • Vadillo, D., M.R. Mackley, and T. Tuladhar, The quantification of viscoelasticity for low viscosity ink jet fluids containing polymer and particle interactions, in AERC. 2009: Cardiff. (presentation)
  • Vadillo, D.C., Tuladhar, T.R., Mulji, A., Mackley, M.R., The rheological characterisation of linear viscoelasticity for ink jet fluids using Piezo Axial Vibrator (PAV) and Torsion Resonator (TR) rheometers. Journal of Rheology, 2010 54(4) p. 781-795
  • D.C. Vadillo, T.R. Tuladhar, A.C. Mulji, S. Jung, S.D. Hoath and M.R. Mackley, Evaluation of the ink jet fluid's performance using the "Cambridge Trimaster" filament stretch and break-up device". Journal of Rheology 54(2), 261-282, 2010
  • Vadillo, D., Mulji, A., Tuladhar, T., Jung, S. and Mackley, M., The effect of inkjet ink composition on rheology and jetting behaviour, in International Conference on Non-Impact Printing, NIP 25, 2009, Louiseville, Kentucky, USA, pp.736-739.
  • D.C. Vadillo, S.D. Hoath, W-K. Hsiao and M.R. Mackley, in Proc 27th Int. Conf. on Digital Printing Technologies, NIP27, Minneapolis, MN, USA, 2011, 568-572, 'The effect of inkjet ink composition on rheology and jetting behaviour'.
  • Yang, L. and C.D. Bain. Liquid jet instability and dynamic surface tension effect. in International Conference on Non-Impact Printing, NIP25, 2009, Louisville, Kentucky, USA, pp. 79-82.
  • Yang, L, and C.D. Bain, Study of liquid jet instability by confocal microscopy. Submitted to Journal of Fluid Mechanics.
  • Yarlanki, S. and O. Harlen, Jet Breakup of Polymeric Fluids, in ICTAM XXII. 2008: Adelaide.
  • Yokoi, K., Vadillo, D. and Hinch, J. Numerical simulations of droplet impact on homogeneous and heterogeneous substrates, in Dynamics of Printed Drops. 2008, Institute of Physics: London.
  • Yokoi, K., Vadillo, D. and Hinch, J. Numerical studies of droplet impacts on homogeneous and heterogeneous substrates. in APS Fluid Dynamics. 2008. San Antonio. see abstract http://meetings.aps.org/link/BAPS.2008.DFD.HP.7
  • Yokoi, K., Vadillo, D., Hinch, J., Hutchings, I., Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface. Physics of Fluids, 2009. 21(7), p.072102.

Publication list from collaborators

  • Etienne, J.E. and Hinch E.J. 'Surface flow of a viscoelastic material' Journal of Non-Newtonian Fluid Mechanics, 136 (2-3) (2008)
  • Colegate, D. M.; Bain, C. D. 'Marangoni Effects in Liquid Jets of Nonionic Surfactants'. Aus. J. Chem. 58, 678-682 (2005)
  • Colegate, D. M.; Bain, C. D. 'Adsorption Kinetics in Micellar Solutions of Nonionic Surfactants'. Phys. Rev. Lett. 95, 198302 (2005)
  • Weiss, M.; Darton, R. C.; Battal, T.; Bain, C. D. 'Surfactant Adsorption and Marangoni Flow in Liquid Jets: II. Modelling' Ind. Eng. Chem. Res. 2004, 43, 5203-5220 (2004)
  • Battal, T., Bain, C. D., Weiss, M., Darton, R. C. 'Surfactant Adsorption and Marangoni Flow in Liquid Jets: I. Experiments'. J. Coll. Interface Sci., 263, 250-260, (2003)
  • J. Bent, L. R. Hutchings, R. W. Richards, T. Gough, R. Spares, P. D. Coates, I. Grillo, O. G. Harlen, D. J. Read, R. S. Graham, A. E. Likhtman, D. J. Groves, T. M. Nicholson, T. C. B. McLeish. 'Neutron-Mapping Polymer Flow: Scattering, Flow Visualization, and Molecular Theory' Science VOL 301 19 September, 1691-1695, (2003)
  • Jie Li, Marco A. Fontelos. 'Drop dynamics on the beads-on-string structure for viscoelastic jets: A numerical study' Physics of Fluids, Vol. 15, No. 4, 922-937 (2003)
  • Dong-Youn Shin, Paul Grassia, Brian Derby. 'Oscillatory limited compressible fluid flow induced by the radial motion of a thick-walled piezoelectric tube' J. Acoust. Soc. Am. 114 (3), September, 1314-1321. (2003)
  • D. M. A. Buzza, 'General Theory for Capillary Waves and Surface Light Scattering' Langmuir, 18, 8418-8435. (2002)
  • T.C.B. McLeish. 'Tube Theory of Entangled Polymer Dynamics' Advances in Physics, 2002, Vol. 51, No. 6, 1379-1527. (2002)
  • D. J. Read and T. C. B. McLeish. 'Molecular Rheology and Statistics of Long Chain Branched Metallocene-Catalyzed Polyolefins' Macromolecules 2001, 34, 1928-1945. (2001)
  • Lee, K., Mackley, M.R., McLeish, T.C.B., Nicholson, T.M. and Harlen O.G. 'Experimental observations and numerical simulation of transient `stress fangs' within flowing molten polyethylene', J Rheology, 45,1261-1277, (2001).
  • Richard F. Day, E. John Hinch, and John R. Lister 'Self-Similar Capillary Pinchoff of an Inviscid Fluid' Vol. 80, No. 4 Physical Review Letters 26 January, 704-707. (1998)
  • D. M. A. Buzza, L. Jones, C. B. McLeish, W. Richards 'Theory of surface light scattering from a fluid-fluid interface with adsorbed polymeric surfactants' J. Chem. Phys., Vol. 109, No. 12, 22 September 1998, 5024-5008. (1998)
  • P. Szabo, J.M. Rallison, E.J. Hinch. 'Start-up of flow of a FENE-fluid through a 4:1:4 constriction in a tube' J. Non-Newtonian Fluid Mech. 72, 73-86. (1997)
  • Manning-Benson. S.; Bain, C. D.; Darton, R. C. 'Measurement of Dynamic Interfacial Properties in an Overflowing Cylinder by Ellipsometry'. J. Colloid Interface Sci., 189, 109-116. (1997)
  • V.M. Entov and E.J. Hinch, 'Effect of a Spectrum of relaxation times on the capillary thinning of a filament of elastic liquid' J. Non-Newtonian Fluid Mech, 72, 31-53. (1997)
  • M.R. Mackley, R.T.J. Marshall and J.B.A.F. Smeulders. 'The Multipass Rheometer' J. Rheology, 39(6), 1293-1309 (1995)
  • Harlen, O.G. 'Simulation of Viscoelastic Flows' in 'The mechanics of thin film coatings'(Ed. P.H. Gaskell, M.D. Savage and J.L. Summer) World Scientific 366- 374 (1995)
  • Harlen, O.G., Rallison, J.M. and Szabo, P. 'A split Lagrangian-Eulerian method for simulating transient viscoelastic flows', J. Non-Newtonian Fluid Mech., 60, 81-104, (1995).
  • E.J. Hinch 'Mechanical models of dilute polymer solutions in strong flows' The Physics of Fluids,Vol. 20, No. 10, Pt. II, 522-530, (1977)